Contact Canfor Sales

About Canfor

Canfor is one of the world’s largest producers of sustainable lumber, pulp and paper. We’ve built our reputation on the quality of our products, the reliability of our supply and our superior customer service. Find out more about why customers around the world prefer Canfor.

Explore Our Products: Scroll Down


Renewable. Sustainable.
Grown by the power of the sun.

Wood is an excellent choice for environmentally responsible construction.

Canfor’s kiln-dried Spruce-Pine-Fir (SPF) and Southern Yellow Pine (SYP) lumber products are ideal for a wide range of residential, commercial and industrial construction. Our consistent, high-quality lumber yields many benefits for builders – including less waste and fewer construction delays – that translate to higher profits.

Spruce - Pine - Fir (SPF)

Our kiln-dried Spruce-Pine-Fir (SPF) is the preferred choice of framing professionals because it is stable, less prone to crook or bow, is straighter than green wood and other species, and is lightweight and easier to work with. It is easy to cut, nail and screw.

We produce SPF at the following British Columbia sawmills:

Read More About SPF
  • Chetwynd Sawmill

    Chetwynd, BC.
    Part of Canfor since 1963

    Chetwynd Sawmill

    #4700, 50th Street
    PO Box 180
    Chetwynd, BC
    V0C 1J0

    T: 250 788-2231
    F: 250 788-4310

    SPF Dimension Lumber
  • Fort St. John Sawmill

    Fort St. John, BC.
    Part of Canfor since 1981

    Fort St. John Sawmill

    Swanson Lumber Road
    RR 1
    Site 13, Compartment 2
    Fort St. John, BC 
    V1J 4M6

    T: 250 787-3600
    F: 250 787-3622

    SPF Dimension Lumber
  • Grande Prairie Sawmill

    Grande Prairie, AB.
    Part of Canfor since 1955

    Grande Prairie Sawmill

    9401-108 Street
    Postal Bag 100
    Grande Prairie, Alberta
    T8V 3A3


    T: 780 539-0804

    SPF Dimension Lumber
  • Houston Sawmill

    Houston, BC.
    Part of Canfor since 1999 with the acquisition of Northwood Inc.

    Houston Sawmill

    1397 Morice River Road
    PO Box 158
    Houston, BC
    V0J 1Z0

    T: 250 845-5200
    F: 250 845-5294

    SPF Dimension Lumber
  • Isle Pierre Sawmill

    Prince George, BC.
    Part of Canfor since 1970

    Isle Pierre Sawmill

    5410 Isle Pierre Road Bag Service
    Box 6000
    Prince George, BC
    V2N 2K3

    T: 250 441-5900
    F: 250 441-3308

    SPF Dimension Lumber
  • Mackenzie Sawmill

    Mackenzie, BC.
    Part of Canfor since 2005 with the acquisition of Slocan Group

    Mackenzie Sawmill

    Box 310, 1801 Mill Road
    Mackenzie, BC
    V0J 2C0

    T: 250 997-3271 
    F: 250 997-2568

    SPF Dimension Lumber
  • Plateau Sawmill

    Vanderhoof, BC.
    Part of Canfor since 2005 with the acquisition of Slocan Group

    Plateau Sawmill

    1399 Bearhead Road
    Vanderhoof, BC
    V0J 3A2

    T: 250 567-4725
    F: 250 567-3911

    SPF Dimension Lumber
  • Polar Sawmill

    Bear Lake, BC
    Part of Canfor since 1989 with the acquisition of Balfour Guthrie

    Polar Sawmill

    36654 Hart Highway
    General Delivery
    Bear Lake, BC
    V0J 3G0

    T: 250 972-4700
    F: 250 972-4323

    SPF Dimension Lumber
  • Radium Sawmill

    Radium Hot Springs, BC
    Part of Canfor since 2005 with the acquisition of Slocan Group

    Radium Sawmill

    4685 Forsters Landing Road
    PO Box 39
    Radium Hot Springs, BC
    V0A 1M0

    T: 250 347-9611
    F: 250 347-9630

    SPF Dimension Lumber, Canfor RED Lumber
  • Vavenby Sawmill

    Vavenby, BC
    Part of Canfor since 2005 with the acquisition of Slocan Group

    Vavenby Sawmill

    2996 McCorvie Road,
    Box 39
    Vavenby, BC
    V0E 3A0

    T: 250 676-9518
    F: 250-676-9455

    SPF Dimension Lumber
  • Elko Sawmill

    Elko, BC
    Part of Canfor since 2012 with the acquisition of Tembec Industries’ BC solid wood assets

    Elko Sawmill

    9600 Cascade Street
    Elko, BC
    V0B 1T3

    T: 250 529-7211
    F: 250 529-7275

    SPF Dimension Lumber, Canfor RED Lumber
  • Prince George Sawmill

    Prince George, BC.
    Part of Canfor since 1999 with the acquisition of Northwood Inc

    Prince George Sawmill

    6988 Landooz Road
    PO Box 9000
    Prince George, BC
    V2L 4W2

    T: 250 962-4700
    F: 250 962-4718

    SPF Dimension Lumber

Southern Yellow Pine (SYP)

Our Southern Yellow Pine (SYP) delivers strength and stability, and its natural beauty provides architectural appeal. We offer high-quality treated, untreated and remanufactured SYP products.

We produce SYP products at our sawmills in the United States:

Read More About SYP
  • Graham Plant

    Graham, North Carolina.
    Part of Canfor since 2006 with the acquisition of New South Companies Inc

    Graham Plant

    4408 Mt. Herman-Rock 
    Creek Road
    Graham, North Carolina,
    U.S.A. 27253

    T: 336 376-3130
    F: 336 376-8403

    SYP Dimension Lumber
  • Conway Plant

    Conway, South Carolina
    Part of Canfor since 2006 with the acquisition of New South Companies Inc

    Conway Plant

    1283 Hwy. 501 Business
    Conway, South Carolina,
    U.S.A. 29526

    T: 843 347-4288
    F: 843 349-3448

    SYP Dimension Lumber, Treated Lumber
  • Camden Plant

    Camden, South Carolina
    Part of Canfor since 2006 with the acquisition of New South Companies Inc

    Camden Plant

    1281 Sanders Creek Road
    PO Drawer 1016
    Camden, South Carolina, 
    U.S.A. 29020-1026

    T: 803 425-1810
    F: 803 424-2825

    SYP Dimension Lumber, Treated Lumber
  • Darlington Plant

    Darlington, South Carolina
    Part of Canfor since 2007

    Darlington Plant

    1100 Chesterfield Lumber Drive
    Darlington, S.C.
    29532, USA
    Mail Address:PO Box 97
    Darlington, S.C.
    29540, USA

    T: 843 393-1211
    F: 843 393-7376

    SYP Dimension Lumber
  • Marion Plant

    Marion, South Carolina.
    Part of Canfor since 2006 with the acquisition of New South Companies Inc

    Marion Plant

    402 Bypass 576
    PO Box 1519
    Marion, South Carolina
    USA 29571-1519

    T: 843-423-1385
    F: 843-423-3475


    SYP Dimension Lumber
  • Balfour Lumber Company

    Thomasville, GA

    Balfour Lumber Company

    800 West Clay Street
    PO Box 1337
    Thomasville, GA
    USA 31792


    SYP Dimension Lumber
  • Beadles Lumber Company

    Moultrie, GA

    Beadles Lumber Company

    900 6th St NE
    PO Box 3457
    Moultrie, GA
    USA 31768


    SYP Dimension Lumber
  • Mobile Plant

    Mobile, AL
    Part of Canfor since 2013 with phased acquisition of Scotch and Gulf Lumber LLC

    Mobile Plant

    1850 Conception Street Road
    Mobile, Alabama 
    USA 36610

    SYP Dimension Lumber
  • Fulton Plant

    Fulton, AL
    Part of Canfor since 2013 with phased acquisition of Scotch and Gulf Lumber LLC

    Fulton Plant

    119 North Main Street
    Fulton, Alabama
    USA 36446

    SYP Dimension Lumber
  • Jackson Plant

    Jackson, AL
    Part of Canfor since 2013 with phased acquisition of Scotch and Gulf Lumber LLC

    Jackson Plant

    4170 Industrial Park
    Jackson, Alabama
    USA 36545
    SYP Dimension Lumber
  • Hermanville Plant

    Hermanville, MS
    Part of Canfor since 2014 with phased acquisition of Southern Lumber Company

    Hermanville Plant

    11167 Pattison Hermanville Road
    Hermanville, Mississippi
    U.S.A. 39086

    Mailing Address:
    PO Drawer 70
    Hermanville, Mississippi
    U.S.A. 39086
    SYP Dimension Lumber
  • Arkansas Laminating Plant

    El Dorado, AR
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Arkansas Laminating Plant

    256 Cooper Drive
    El Dorado, AR
    USA 71730

    T: 1-870-862-2995
    F: 1-870-862-3172


    Glued Laminated Timber (Glulam), Laminated Veneer Lumber
  • Georgia Laminating Plant

    Washington, GA
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Georgia Laminating Plant

    256 Edison Road
    Washington, GA
    USA 30673

    T: 1-706-678-7405
    F: 1-706-678-7032


    Glued Laminated Timber (Glulam), Laminated Veneer Lumber
  • Arkansas Plant

    El Dorado, AR
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Arkansas Plant

    1236 Urbana Road
    El Dorado, AR
    USA 71730

    T: 1-870-962-3206
    F: 1-870-962-3320


    SYP Dimension Lumber
  • Anthony EACOM Inc. – I-Joist Plant

    Sault Ste. Marie, Ontario
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Anthony EACOM Inc. – I-Joist Plant

    1195 Peoples Road
    Sault Ste. Marie, Ontario
    CANADA P6C 3W7

    T: 1-705-254-7597
    F: 1-705-254-1879


    Power Joist
  • Louisiana Chip Mill

    Plain Dealing, LA
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Louisiana Chip Mill

    10036 Hwy 3 North
    Plain Dealing, LA
    USA 71064

    T: 1-318-326-5811
    F: 1-318-326-5835


    Pine and Hardwood Chips
  • Texas Chip Mill

    Troup, TX
    Part of Canfor since 2015 with the acquisition of Anthony Forest Products Co.

    Texas Chip Mill

    18410 County Road 2153
    Troup, TX
    USA 75789

    T: 1-903-842-3714
    F: 1-903-842-4917


    Pine and Hardwood Chips

Canfor RED

Canfor RED products originate from our western Canadian fibre baskets. They include our premium J-Grade products destined for the Japan market, and SPF products made from fibre less impacted by the mountain pine beetle.

We produce Canfor RED products at the following British Columbia sawmills:

Read More About Canfor Red

Sawmill Operations

We convert logs into lumber at our sawmills, with automated and manual checks at each step to ensure our high standards are being met. All of our mills have quality policies registered to the ISO9001 standard.

Show Mill Areas
Log storage

Our Canadian mills have yards where we store logs for processing during the times of the year when the soil is too wet for harvesting. Our southern U.S. mills do not store logs.

Debarking and Scanning

When the log enters the mill, its bark is removed, and the log is scanned to determine the best sawing pattern to yield the highest quality and greatest amount of dimension lumber.


Using the scanning knowledge, the logs are cut into lumber. Most of our facilities have curve sawing technology which can follow any bends in a log to maximize lumber recovery volumes.


After the lumber is sawn each board travels through a trimmer, removing the rough ends.


The boards are sorted by dimension and moisture, before they are stacked and sent to the drying kilns.

Dry Kilns

Using kilns fuelled by biomass or natural gas, we dry all our lumber to a consistent moisture content.


The boards are planed to provide a smooth finish.


The boards are graded to extract maximum value and provide quality product to our customer that meet specifications.


The lumber is grade stamped, sorted by grade and dimension, stacked and wrapped for storage and delivery to the customer.


Our products move across North America by train and truck, and overseas by ship.


The chips and sawdust from our lumber manufacturing processes are used to make pulp, paper and green energy, bringing our utilization of wood fibre to virtually 100%.

Energy System

Many of our mills use wood residuals to generate heat to run their kilns and heat the building. This reduces our reliance on natural gas, and lightens our carbon footprint.

Pulp & Paper

Canfor is a leading global supplier of pulp and paper products, with four mills in British Columbia – three in Prince George and one in Taylor.

British Columbia’s northern forests produce some of the finest trees and fibre available for pulp and paper. The climate encourages slow growth of white spruce, lodgepole pine and alpine fir trees that produce long, slender, flexible and strong cellulose fibres. Our pulp is known for its superior strength and quality, and we are continuously improving our environmental and operational performance.

Most of our production is northern bleached softwood kraft (NBSK) pulp but we also produce specialty unbleached and bleached chemo-thermo mechanical pulp. Our pulp mills are true bio-refineries – we produce quality pulp and paper products and we generate green energy for our own operations and for sale to consumers, minimizing waste and ecological impact.

Pulp Mill Operations

Eco-efficiency and the kraft process

Wood Chips

70% of the wood chips for our pulp operations come from our sawmill operations in northern British Columbia. The rest are purchased from local suppliers.


Chips are cooked in large tanks called digesters. A combination of chemicals, heat and pressure dissolve as much lignin as possible while keeping the fibres containing cellulose as long, unbroken and strong as possible.

Mechanical pulp production uses mechanical stressing and heat instead of chemicals. Chemi-mechanical uses a short chemical treatment followed by mechanical pulp production. The kraft process uses a mixture of sodium hydroxide and sodium sulfide to break the bonds that link the lignin to the cellulose.

The chips are cooked in a large digester. In the sulphate method, the chips are cooked in liquor, an alkaline chemical solution. The cooked pulp is then washed and knots and other debris are separated from the fibers.


The pulp is separated from incompletely cooked wood chips, dirt and other debris through screens and centrifugal cleaning. The rejected wood chips are reprocessed.


The cooked pulp is brown so it may be bleached to make it brighter and cleaner. Our mills use chlorine dioxide, oxygen and hydrogen peroxide, resulting in environmentally superior ECF (elemental chlorine free) pulp.


The pulp is converted into sheets, and the water is drained through a combination of gravity and suction. The sheets pass through presses that squeeze out more water before going to a dryer where steam-headed air jets reduce the water content to less than 10%.


The sheets are cooled, cut into smaller sheets and baled before being wrapped and shipped to customers.

Energy Production

We use virtually 100% of our wood fibre to create useful products. The residuals from our lumber operations become a source of fibre for our pulp mills, are used to heat our sawmills or are turned into pellets that are exported as a green fuel source.

Canfor Pulp is one of the largest single producers of bioenergy in North America. Our modern kraft pulp mills operate as a large-scale bio-refinery, and our goal is to become energy self-sufficient and export surplus power to the electricity grid. We generate 895 million kwh of electricity a year – enough to power a city the size of Prince George.


Pulp Mills

We continue to pursue a number of projects that will improve the environmental performance and/or energy efficiency of our pulp mills. We reduced fossil fuel use by 70% in the last 15 years so greenhouse gas emissions are at an all-time low.

Since 2012, we have realized substantial benefits from capital investments, including more renewable energy, lower heat losses and fewer emissions. Our processes are more eco-efficient, and our goal is to develop enough capacity to become energy self-sufficient.

Our pulp mills separate fibres and use the non-fibrous components as fuel, minimizing waste and the ecological impact. We use steam generated in our boilers to generate electricity and heat for our operations, and we export surplus power to the grid for other users.

The recovery and utilization of the black liquor produced in the pulping process is an essential part of the pulp production process. Half of the wood raw material is utilized as chemical pulp fiber. The other half is utilized as fuel for electricity and heat generation.


Our thermal heat energy systems use bark and, in some cases, planer shavings to dry lumber and heat our mills. By creating energy from manufacturing by-products, we reduce or eliminate our reliance on natural gas, decrease our greenhouse gas emissions, improve air quality, reduce our mill conversion costs, and improve wood fibre utilization.

Eight of our mills – Fort St John, Mackenzie, Prince George, Plateau, Chetwynd, Vavenby, Radium, and Elko – have been upgraded to improve utilization of wood residuals and reduce the use of natural gas as an energy source. Our Green Energy biomass cogeneration facility in Grand Prairie produces 105,000 MWH of renewable electricity and 200,000 GJ of heat for our sawmill, and sells renewable electricity to the Alberta grid.


We jointly own Houston Pellet Limited Partnership with Pinnacle Pellet and the Moricetown Indian Band. The plant, located at our sawmill in Houston, British Columbia, produces wood pellets from sawmill residuals. In September 2014, we announced the construction of two pellet plants – one at each of our Chetwynd and Fort St. John facilities. The combined production of these facilities will be 175,000 tonnes. The industrial grade fuel pellets provide clean biomass energy to customers in Europe, North America and Asia.

Forest Management

Independent third-party certification of our forest management activities provides customers and stakeholders with assurance of sustainability.


Our performance supply chain management and logistics support provides second-to-none service to valued customers in North America and offshore.

We move our products to North American customers by rail and truck, and ship products from Western Canada to offshore markets through the ports in Vancouver or Prince Rupert.

We sell Southern Yellow Pine products primarily in the U.S. market. Our trucking division, New South Express, is located in Myrtle Beach, SC, and moves product in the U.S. Southeast. Our operations in Alabama export products to the Caribbean through the Port of Mobile.

Canfor Pulp Innovation

We know the value of research and development to meet the needs of our customers. We have been actively engaged in pulp and paper research, development and innovation for
17 years, and we collaborate with Canadian research organizations and universities. Our TEMAP website is an open resource with comprehensive fibre intelligence, including the most up-to-date pulp and paper insight and information from in-house, consultative and external experts.

Fibre Supply

Canfor’s Western Canadian operations source wood fibre primarily through long-term replaceable tenure agreements on publicly-owned land. We have Western Canada’s largest supply of green softwood fibre, making us North America’s leading producer of high-quality SPF dimension lumber. Canfor Southern Pine operations in the southern United States do not manage any forestland directly and instead source fibre from neighbouring private forest landowners. Wherever we operate, we demonstrate our commitment to sustainable forestry.